BPNKW - BC-10 BOND COAT PART A
- MSDS: BPNKW
- Manufacturer: AMERICAN ABRASIVE METALS CO
- Product Name: BC-10 BOND COAT PART A
- National Stock Number: 5610-01-293-7812
Product Identification
Product ID:BC-10 BOND COAT PART A
MSDS Date:01/28/1988
FSC:5610
NIIN:01-293-7812
Status Code:A
Kit Part:Y
MSDS Number: BPNKW
Responsible Party
IRVINGTON, NJ 07111
US
Emergency Phone: 201-373-7060
Info Phone: 201-373-7060
Cage: 88444
Contractor
Telephone: 973-403-2600
Cage: 88444
Ingredients
(ORAL,RAT)>5 G/KG.
Hazards
LD50 LC50 Mixture:SEE INGREDIENT
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:BREATHING DIFFICULTIES,
IRRITATION. SKIN:IRRITATION, SENSITIZATION, DERMATITIS. MAY CAUSE
ALLERGIC SKIN REACTION. EYES:IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN CONDITIONS, KIDNEY OR LIVER
DISEASE.
First Aid
First Aid:SKIN:WASH W/SOAP & WATER. INHAL:REMOVE TO FRESH AIR. GIVE O2
IF NEEDED. INGEST:GIVE LARGE QUANTITIES OF WATER, INDUCE VOMITING.
CALL MD. EYES:WASH W/LARGE QUANTITIES OF WATER FOR AT LEAST 15
MINUTES. GET MD.
Fire Fighting
Flash Point Method:CC
Flash Point:>200F,>93C
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DECOMPOSITION & COMBUSTION PRODUCTS MAY
BE TOXIC.
Accidental Release
Spill Release Procedures:AVOID ALL PERSONAL CONTACT. TAKE UP W/
ABSORBENT MATERIAL. SHOVEL INTO CLOSABLE CONTAINERS. FLUSH
CONTAMINATED AREA W/WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:WARNING! CAUSES IRRITATION. AVOID
CONTACT W/ EYES, SKIN OR CLOTHING. AVOID BREATHING VAPOR, MIST OR
SPRAY. USE W/GOOD VENTILATION.
Other Precautions:STORE IN COOL, DRY AREA IN CLOSED CONTAINER. MAY
CRYSTALLIZE IF STORED BELOW 20C (68F).
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED ORGANIC CHEMICAL
CARTRIDGE RESPIRATOR IF NEEDED.
Ventilation:GOOD LOCAL EXHAUST OR MECHANICAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING.
Work Hygienic Practices:DO NOT SMOKE OR EAT WHILE HANDLING MATERIAL.
WASH AFTER HANDLING.
Supplemental Safety and Health
KEY1;N1.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<0.1 @ 20C
Spec Gravity:1.1 (H2O=1)
Evaporation Rate & Reference:<1 (BUTYL ACETATE = 1)
Solubility in Water:NIL
Appearance and Odor:CLEAR LIQUID, MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG BASES OR ACIDS.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:CO2, CO & OTHER TOXIC FUMES.
Conditions to Avoid Polymerization:STRONG ACIDS OR BASES IN BULK.
Disposal
Waste Disposal Methods:DISPOSE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.